Gilbert (Somewhere, Wales)

A model of Gilbert from the Roblox game Somewhere, Wales. You might want to print the frame on its side so it has smoother edges. Special thanks to GlimpseOfGood for getting me reference images! I couldn't have made this without their screenshots!!!!! YOU WILL NEED: Sandpaper model filler putty stuff idk what it's called Plastic drinking straw (7mm dia. FOR CHIMNEY AND BEARINGS) Paper (FOR CAB ROOF) Paperclips (to cut and bend to make the coupling hooks) Tiny chain, maybe from a necklace? Something that can fit around the paperclip hooks. Nails (2mm dia. FOR CRANKPINS, CUT TO SIZE) Glue of some kind (i'm using hot glue because i'm lazy) Spraypaint (OR AIRBRUSH APPARATUS) Primer Ingenuity (TO FIGURE OUT HOW HE GOES TOGETHER BECAUSE I'M TOO LAZY TO WRITE INSTRUCTIONS) Printbed 150mmx150mm Cut the drinking straw to a length of roughly 38mm for the chimney. Bearing straw bits are 20mm give or take and probably don't need to be glued in place. Crankpins should be cut to 4mm for the middle wheels and 3mm for the other wheels. The random cylinder piece included in A1_Rods_Cylinders_Axles_Wheels_Firebox_Boilerjoiner.STL is there so you can join the boiler to the smokebox. There's also customization options. Don't want sandboxes? Want them in a different spot? Wanna put the fill caps somewhere else? Fill caps not printing right? Use A1_Boneless_Accurate_Tanks.STL. Want them rounded at the front? Use A1_Boneless_Tanks.STL. Want a different bunker? Use A1_Geraldine_Bunker.STL. I'll make KVLR couplings soon, but if you want the cowcatchers you're on your own. Also this was built to a horrific and unethical gauge of 25mm, roughly 1:24 scale. Rails and ties for display are included. CRISIS AVERTED THE TANKS ARE FIXED IDK HOW I MANGED TO MESS THEM UP I THOUGHT THEY WERE ROUNDED AT THE FRONT BUT THEY AREN'T