Gothic Dungeon Terrain Blocks - Arched Window

A modular terrain piece compatible with 35mm tile systems, such as Dungeon Blocks. The main piece is a half wall, but a modular tall wall piece can be connected for vertical areas of your dungeon. The modular tall wall piece is identical to the one included with the Torch piece (thingiverse.com/thing:7323594), and can be fit to either piece as needed. In addition to the PLA printed parts, I have also used two 1.5 * 20mm steel dowel pins. The modular tall wall piece connects using these. They are glued to the top piece, so that it can slot into the pin holes in the main piece. The pieces in the photos were printed on a Bambu A1, using a 0.2mm nozzle, and the Bambu standard 0.1mm print profile. They were primed with Citadel Chaos Black spray primer, lightly dusted with Citadel Mechanicus Standard Grey spray primer, then dry brushed with Vallejo Medium Sea Grey. I've included the .blend file if you want to make any adjustments, derivative works, or integrate it into your own preferred terrain system. If you do use it, I would love to see what you make with it.