Gridfinity/Clickfinity edge baseplates with connectors (gridfinity compatible)

The clickfinity baseplates by James Boone are amazing https://www.printables.com/model/719455-gridfinity-clickfinity-baseplate-w-connectors , but they are not designed to be flushed with a vertical surface. (You might also want to consider clickbase plates https://www.printables.com/model/982173-clickbase-a-no-magnet-latching-gridfinity-baseplat/files since they are a good alternative to clickfinity). These section baseplates allow you to create a perimeter of width 2 for a total of size of at least 6x6. you need an original clickfinity baseplate (see https://www.printables.com/model/719455-gridfinity-clickfinity-baseplate-w-connectors) to fill the center (all edges should have female connectors). For sizes smaller than 6x6, simply use a baseplate of the desired size. How to use: Print 4 corners Print the sides according to the desired final size. Any length larger than 2 can be created with a combination of the 2,3 and 5 sized ones. At this point you should have the perimeter. Now print the necessary clickfinity baseplates with connectors to fill the center. A big thank you to James Boone for making available the Fusion360 file.