Hadley Hill Mount Clamp Remix

This part is derived from the Adjustable Pressure Clamp . It is slightly wider than the original to make it compatible with the Hill Mount . print this alongside the original parts of the clamp. Use this instead of Lower.stl and/or Lower - mirrored.stl files from the original. You'll have to mirror it yourself in your slicer if you want a second one for the opposite side. I only needed one for my setup. Print in PETG and make it thicc to prevent breakage on the layer lines. I used 5 walls and 35% rectilinear infill. I was able to get away with using an M4x40mm socket head bolt with a nut thread locked to the head of the bolt.