Hadley Telescope: Tubes

I moved this out of Hadley Telescope Mods to prevent it to become to big and confusing because of many different topics. Another approach for threaded tubes. I added an extra part besides the well known A/B/C tubes types from the original Hadley telescope tube subassembly - Vase mode , the tube holder. 📷 Image redacted — claim this model to add your own media I printed three of these. Two are going on each side of the UTA and one on top of the LTA. The A/B/C tubes are flexible enough to squeeze them through the rods. I printed one A tube, two B tubes and one C tube to assemble a full length tube. The tube holder on top of the UTA is to hold the cap. The cap fits on the tube holder, the small side of A tube and on C tube. I realized later, that the cap doesn't fit because of the collimation screws. So I added another A tube on top. Printed with PETG, 0.4 nozzle, 0.20 mm SPEED profile on a MK4S. Please note: It's not compatible with the original. Also, do not print any of the parts in vase mode.