Hawk Bust Statue

This was created using both gemini and makeworld ai. gemini was used for the creating the image and makeworld for the 3d modeling and stl file. then used blender and to scale the model to what i wanted and 3d builder to split the model into multi pieces. if you have a big enough printer you can print the whole thing in one go but if you do then go for the split. you do not need to print the base the head alone can stand up by itself. i am sure there are easier ways to do this but to me it is the quickest and easiest method and i think it turn out good. it took a little over 2 days just to print the bust and about a 19 hrs for the base. i ended up shrinking the base otherwise it would have been another 2 days just to print that as well. that is because i have ender 3 base model so it was a slow process. anyways the bust turned out great. the head i tried to get to about 65.5 to 66 mm wide and the widest part is about 140 mm. specs. 20% infill with grid pattern both support and adhesion