Heltec LoRa32 V3 Meshtastic Case with Buzzer/GPS/Environment sensor, M5Stack CardKB Keyboard-ready

Print tips: Lay the faces of the surfaces flat on the build plate. If you have a well dialed in printer you will not need to use supports. If you don't, use tree supports. Please see the readmes in the original. You may want to increase the case size by 1% in your slicer if you're a first layer squish person. You will need the following hardware: 3 x M3x5mm screws for securing modules inside the case. 2 x M2x8mm self-tapping screws. 1 x M3x15mm screw for the belt clip. 1 x M3x8mm screw and 1 x M3x15mm screw for assembling the enclosure. 6 x M3x6mm heat-set inserts for reinforced threaded mounting points.