Heltec T114 + MOXON

3d model for meshcore and meshtastic. It consists of three parts. Use m2 screws as fasteners, and apply glue to the front cover. At 100% full, the print time is 7h 30m. When 50% full, the printing time is 3h 45m. With a layer height of 0.15. There is no GPS. Composition: Heltec T114 Moxon antenna Battery 495383 screws m2x8 (m2x6) - 6 pcs Double-sided adhesive tape A little glue IPX cable from 10 cm