Honey Dipper

Honey dipper for the narrow 12 oz honey jars. Dipper replaces the lid and allows for easy use with minimal mess. Dipper reaches to within 1/2 inch from the bottom. Made out of PETG. All parts assemble and screw together, no glue required. Can be disassembled for cleaning if desired. Stalk has a support mid-height to help with print stability. I did this before knowing about BambuStudio's ability to 'paint' support where you need it. Not sure if it would work here or not. To assemble: There are 2 small disks and 3 larger disks. Slide one of the small disks, then a spacer. Do the same for the 3 larger disks. Top it off with 2nd small disk. There is threaded round nut that will hold it all together. Screw in the handle to top side of the dipper jar cover. Due to the volume of the dipper, you MAY need to use some honey first. I haven't tried using it on a fresh bottle.