Horns on hairband
by manmac · via Printables
| Format | STL |
| Category | Other |
| License | CC BY-NC-SA |
| Triangles | 53.3k |
| Uploaded | Oct 16, 2025 |
⬇ 1.6k downloads
❤ 513 likes
👁 5.7k views
Description
Improved V2 - better hairband connector see: https://www.printables.com/model/1446163-horns-on-hairband-v2 The horns have a tight fit on the hairband so that you can adjust the position as you like, no glue needed. Horns printed in PLA (matt PLA was used for the pictures) both 0.1 or 0.2 mm layer height should work. 15% infill is sufficient for having good stability at the base (you can add a modifier with 0% infill at 60mm height) for best quality print horn separately Hairband PLA or PETG both 0.1 or 0.2 mm layer height should work. no infill needed organic support for the connectors Hairband adjustments: too narrow … try to gently bend it in your hands too long … cut the ends with a cutter knife or side cutter and sand the sharp corners
AI Analysis: This is a Halloween-themed head accessory featuring two large red horns attached to a black hairband. The horns are designed with a textured, ribbed pattern and are positioned symmetrically on either side of the hairband. This accessory is typically used for costume purposes, especially for Halloween or themed events, and is often worn to represent a devil or other supernatural character.
Originally published on Printables
