Horns on hairband v2

The horns have a tight fit on the hairband so that you can adjust the position as you like, no glue needed. Horns printed in PLA (matt PLA was used for the pictures) both 0.1 or 0.2 mm layer height should work. 15% infill is sufficient for having good stability at the base (you can add a modifier with 0% infill at 60mm height) for best quality print horn separately Hairband PLA or PETG both 0.1 or 0.2 mm layer height should work. no infill needed organic support for the connectors Hairband adjustments: too narrow … try to gently bend it in your hands too long … cut the ends with a cutter knife or side cutter and sand the sharp corners