Hotone Ampero 2 Stomp box

Hotone Ampero 2 Stomp box with 1 input and XLR stereo out. Printable withoust support I used two stereo jack to XLR adapter cables(30cm) and an input jack from Thomann. I also used a right angle adapter IEC C14 Male Plug to C5 from aliexpress (angled up!) https://www.aliexpress.com/item/1005006652752146.html?spm=a2g0o.order_list.order_list_main.11.b1991802XhlDt1 I used 4 heat press inserts M3x4x5, but you can use normal M3 nuts. You need about 30 M3 screws. I recommend at least 20mm lenght. Box printed from PETG, other things from ASA, but any filament should hold! I recommend at least PETG if you will have this box in your car. Split the model in your slicer! Also it is 309mm long so should fit on a CR10 or similar machine. It incorporates this footswitch with double sided tape: https://www.printables.com/model/906870-box-dual-footswitch-hotone And uses a variation of this box: https://www.printables.com/model/258431-rugged-box-parametric