HSW Business Card Holder

Introduction This design is a tutorial example of my HSW Attach Anything template. Check it out if you want to make your own HSW item, or if you are curious how this was created in just a few minutes! Designed to fit onto HSW (Honeycomb Storage Wall) boards. The display stand, if you were wondering, is here and a smaller one is here . As usual, these are designed with no screws, no glue, no supports, no bridges and easy overhangs. Material Suggest PLA, ASA, ABS, PETG-CF or similar stiffness materials. If you use PETG, the clip will be a little too easy to remove and If you use a stiff material like ASA-CF or ABS-GF, the clip will be difficult to insert/remove. Print settings 2+ perimeters I suggest slowing down the outer walls to ensure the part comes out strong with consistent gloss level all around (but this is optional). This is a fairly easy print, everything else is up to you! General precautions apply - ensure your build plate is clean (wash with hot water and dish soap and dry with a clean towel), add mouse-ears and/or apply some glue if you often have adhesion issues. Support If you would like to say thanks, please post a make and share here and on socials. You could buy me a few metres of plastic on Ko-Fi otherwise, please post a make and check out my other HSW models in this collection . If you are using these stands as a part of your business and are finding it helpful, please consider buying this price label model to support more projects like this. Remixes with significant changes are very welcome.