(HSW) Meterwall - Borders for 5x5 211x201mm Honeycomb Storage Wall (Sized for Core One)

I spent an obnoxiously long time in OpenSCAD designing borders, corners, and inserts to try to make all the seams align, so I figured I would post the files in case anyone else wants to build an HSW a little over a square meter in area. I couldn't manage to align all the seams because the Core One can't print corners big enough to cover the 211x201, so I also designed three special connectors for the corners so that every connector grabs 4 panels. Directions: Print 25x wall-honeycomb-k1-211x201 and 24x insert-hollow-for from the original project Print 2x of everything from this project, except 4x twoByThree Assemble as shown in the install instructions image Hang with narrow side facing the wall and flats on the tops and bottoms I used 3 walls 0% infill for the grid pieces and 2 walls 25% gyroid for the inserts.