ICE scraper

Car windows are not flat, so why would the frost/ ice scraper be? Although most scrapers are 75mm-ish wide, they only scrape around 25mm of ice. This is where my research began. 📷 Image redacted — claim this model to add your own media I found that all car windows have some amount of a curve in their shape, this makes it so the actual contact area is much less than the supposed width that the scraper actually ‘scrapes’ Therefore, I designed this scraper, it prints entirely without support and has 17 individual compliant mechanisms that form the scraper around your window for maximum contact. Settings; - Layer height; 0,20mm - Material; PETG - Perimeters; minimal 3 - Infill 25% Cubic/Gyroid 03/12/2024; Gen 3 release! Made a wider version (150mm instead of 100mm) Made a version with longer handle (200mm instead of 125mm) Made the edge significantly more durable, by changing its printing geometry Made it more reliable to print by implementing enforcement bridges 03/12/2023; Gen 2 release! - The new model is designed from the ground up! It now prints and works correctly with every sheet, has a longer and more comfortable handle, a more durable blade, better printability and a sleek, minimal design. Like my work?? Please consider donating me a coffee :) www.buymeacoffee.com/voxel3d