Improved lock bolt collection for multiboard - multipoint - multiconnect

WARNING: I have not used these in a real-world setup yet, but because I think it will be at least a few weeks before I get around to that I wanted to share them now. PLEASE do a test print and see if this works for you before printing in bulk - my printer tolerances and even the allen keys I use may differ slightly from yours. This is a collection of lock bolts with allen key / hex key holes, compatible with multiboard. Lock bolts are used in combination with e.g. the 6.25 mm - Single Bolt-Lock - ScrewOn Mount . The threads for these parts are not compatible with small, mid or large thread multiboard holes. I made these because I don't feel the coin slot is working for me at all when installing lock bolts in multiboard - and I also didn't find any lock bolts that doubled as a multipoint, which seems like a waste. Parts included: T-bolt lock bolt for allen key (good option if your printer tolerances are not great Split lock bolt for allen key (full thread, f Split lock bolt for allen key, with multipoint Split lock bolt for allen key, with multiconnect (same concept as multipoint, released earlier so a decent amount of models available to download. Slightly bigger so support more weight. Not officially part of the multiboard ecosystem) Print settings - I have not done any stress testing, but given that the allen key hole may structurally weaken the part, consider bumping up walls and infill beyond what you would otherwise print these at. E.g. you might consider 4 walls and 30-50% infill.