iPhone 13 TPU Case with Thick Sides

I wanted a new case for my iPhone 13. Having looked at the available options, I was not happy, so I looked for one that should be easy to modify to fit my needs. I found the “IPhone 13 tpu case” by Majszczur, and remixed it to fit my needs: Thicker back side - The original have a 1.4mm thick back, which is not enough for the camera bump. I added an extra 1mm extra, which helps to protect the camera bump. Extra padding for the corners - the original have a fixed 1.4mm all around, which might not provide enough protection when dropped on a side. I have added an extra 2mm for all of the corners. This also help a bit to grip the phone better. After printing I had a bit of an issue to press the power and volume buttons; but this was fixed by using a thin knife to carefully cut along the top and bottom of the buttons (making them a bit more flexible). Mine is printed on eSun eTPU Transparent Blue. My print settings: 10 Perimeters 0.2mm Layer heights 0 Top Layers 2 Bottom Layers Honeycomb Fill Pattern (15%) Supports where required I specially wanted a visible infill that will look good and provide some extra shock absorption.