iPhone MagSafe Charger Stand 25W with AirPods charging

I love the MagSafe charger stand by Thomas (updated for the new 25W MagSafe charger), but also wanted to be able to charge AirPods on the base and have a more solid overall feel to the stand. In this version, I have added a second well in the stand’s base for a wireless charging puck to charge AirPods (mine was an Anker wireless charger, check the diameter and depth of other chargers for fit). There is additional cable management for this second charger in the form of a tunnel directly out the back of the stand’s base, designed to allow standard USB-C connector to pass through. I have placed cavities in the base to add lead shot through two small openings (with cover plugs included) to provide more weight for stability and to make removing an iPhone easier, especially with one hand. The plugs are meant to be a tight fit, but may need slight sanding to fit more easily. Print Settings Slicer: AnkerMake Studio Printer: AnkerMake M5C Filament: PLA (any would work) Nozzle: 0.4mm Layer height : 0.2mm Infill: 30% Adaptive Cubic Time: 3h 20m Consumables: 22.67m 67.61g Tips I recommend adding a self-adhering 3M silicone pad under the base to prevent slipping when operating the iPhone while charging and when removing the device.