Itachi BookMark

This model was my early work so the model is Thick Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 112.11x200mm in size You may print at higher layer heights below the Base Thickness of 1.52mm The Max allowed Thickness is 3.28mm and the Actual Thickness is 3.28mm Swap Instructions: Start with Black At layer #21 (1.76mm) swap to White At layer #31 (2.56mm) swap to Red for the rest. Setting Layer height: 0.08 Initial Layer height: 0.16 Wall: 2 Sparse infill density: 100% Sparse infill pattern: Rectilinear Turn Off Prime Tower