Jacobs Ladder Toy (Print-in-Place Model)

Commercial license for all my models -→ https://www.patreon.com/MeasureOnce DO NOT SCALE. There is 0.4mm clearance around the joints. If you scale it any smaller then the joints can fuse together. If you print it larger then the joints will be loose and it will fall apart. A print-in-place model for the centuries old toy “Jacobs Ladder.” Does not require any supports and will work right off of the printer! Please make sure your settings are calibrated to handle elephants foot (use a negative initial layer offset) as well as bridging. Do not use a brim. The joints have a gap of 0.015" so make sure your printer can handle that. If it does not work well then you might need to compensate for any over extrusion. 📷 Image redacted — claim this model to add your own media *****Part will need to be reoriented on built plate with the flat side touching the build plate*** 📷 Image redacted — claim this model to add your own media