Just Hanging There – Scraper for Core One/+

Just Hanging There – Scraper for Core One/+ The Just Hanging There – Scraper is a space-saving tool for your Prusa Core One/+. Stop searching for your scraper in drawers and shelves; this one lives exactly where you need it, right on the side of your printer frame. Print Settings -Recommended materials: PLA and PETG -Nozzle: 0.4 mm -Infill: 20 % for the handle. Use 20–100 % infill (or a high wall count) for the blade to ensure a sharp, sturdy edge. -Supports: Not needed. Print both parts flat on the heatbed. Assembly The blade is designed for a snug friction fit into the handle. You can add decorative inserts if you like, but they are not necessary. Note **This Thingiverse upload mirrors my original and first model published on Printables.** Primary source and instructions for use (updates & changelog): https://www.printables.com/model/1656367-just-hanging-there-scraper-for-core-one License Creative Commons Attribution-ShareAlike 4.0 International (CC BY-SA 4.0) You are free to: * Share — copy and redistribute the model in any medium or format * Adapt — remix, transform, and build upon the model * Use commercially Under the following terms: Attribution — You must give appropriate credit to the original author ShareAlike — If you modify the model, you must distribute your contributions under the same license This model is provided as-is, without warranty. Use at your own risk.