K2 Spool Holder

K2 Spool Holder Behold, a K2 Spool Holder - a "Heavy Duty" tabletop 1KG and 2.5KG filament spool holder. A K2 Clip "Heavy Duty" Desktop Spool holder/feeder, designed to be connected with 1/2" EMT Conduit. It's scalable, so you can build this to be narrow or wide to hold multiple spools. This is not a simple print in place holder, you can already find dozens of those, I wanted to create something different, something very sturdy. I have also added a snap-on filament guide / bowden tube feeder, and end caps to accent and express your own flair. As an after thought, I did add the option for you to print your own "conduit" rods, I recommend you test print/fit a small section and scale the larger rod as needed. FYI, conduit is what the cool kids are using. 📷 Image redacted — claim this model to add your own media Get your Prusameters… Post your Makes! If you like this project, please don't forget to ❤ Like and ★ Rate! Print Files / Details: K2SpoolHolder-1KG_v1.0.stl - Main supports K2SpoolHolder-2.5KG_v1.0.stl - Pictured in Grey, LARGE 2.5KG Spool Holder Main Supports (Compatible with all other parts below from the standard 1KG spool holder) Finishing Touch: K2SpoolHolder_Feeder_v1.1.stl - Filament Guide (also accepts a Bowden tube) K2SpoolHolder_ConduitTopPlug_v1.0.stl - Finishing touch to your top spindle K2SpoolHolder_Conduit_BottomPlug_v1.0.stl - Plug those bottom holes with style NEW - K2SpoolHolder_Conduit_BottomPlug_26mm - Optional Bottom plug: Longer to allow for less precise conduit lengths. K2SpoolHolder-Slippery_v1.0 - Optional sleeve your cardboard spools will rotate even more freely. Print in Spiral vase mode with a Brim using a shinny PLA or even a Silk. I printed using clear PLA. Optional 3D Printed Rods: K2SpoolHolder_Rod125mm.stl - 3DPrinted “conduit” Size it the length you wish (use a Brim). K2SpoolHolder_RodTopRing_v1.0.stl - Finishing touch to your top spindle K2SpoolHolder_RodTestFit.stl - Test the fit before printing. My Print Settings: 0.3mm Layer height (for added strength, .2mm works great too) 15% infill Conduit Length? I cut all 3 pieces of EMT conduit at 145mm length. You could go a smaller (like the 3D Printed Rod at 125mm) for a tighter fit, but it's nice to have the wiggle room.