KitchenAid Mixer 3 Attachment Hanger (single piece print)

Remixed hanger for the three mixer attachments that come with a standard KitchenAid mixer. Single piece print. The two countersunk holes are sized for #8 wood screw but a #6 will also work. I've found adhesives tend to come unstuck in this sort of application. Printed in PETG with the flat side down and the large pegs straight up. I allowed snug supports under the smaller pegs that protrude from the large pegs. Awkward description, but hopefully you get the idea. Fits the attachments well. The spacing is a little tight, so I found the attachments basically have to go in the order shown in the photos.