Kobra 2 Camera Mount
by Golden Face · via Printables
| Format | STL |
| Category | Art |
| License | CC BY |
| Triangles | 6.4k |
| Uploaded | Nov 25, 2023 |
⬇ 131 downloads
❤ 22 likes
👁 3.2k views
Description
A bracket to use the articulating pi camera mount on the Anycubic Kobra 2. This should work with the Kobra 2 Pro/Max/Plus not the neo. You will need 2 m3x12 bolts to mount this. Print with 100% infill PLA is fine but wont hold up in a chamber. This mounts to the back of the z gantry carriage. Loosen the z-axis belt. Remove the two bolts that hold the belt tensioner cover. Use two M3x12mm to install the mount onto the back side of the z axis carriage.
Originally published on Printables
