Lack Drawer with Separators

This is a tiny improvement to the already great design by Jerrari on their drawer set for the Ikea Lack table. There are two version here now as of 9/28/2020... they have a different thickness on the separator/divider.. Initially I made the 1mm thick version, but after printing one, I decided I would like the separator to be 2mm thick instead. Print instructions Follow the original printing instructions for the drawer. I have the divider/separators printed to be pretty tight (only .1mm space on each side for the guides on the drawer)... so if you want them to be slightly easier to take in an out, you might want to scale Z to about 90% before you print (separators only).