Lack Enclosure Latch C270 Camera Mount

This simple remix of the Prusa Enclosure Door Knob's latch allows you to mount a Logitech C270 webcam (or any webcam with a 7.1mm rotation shaft) behind your latch for nice overview shots of your print bed. The only hardware required is 1" long #4 machine screw that thread into the plastic (an M3 x 25mm screw should also work) I've included a few variations and adapters, as well as a few simple cable management hooks. Latch Variations: Latch Mount Centered - mount is centered behind the latch (the lens will be offset) Latch Mount with Lens Offset - mount is offset behind the latch in order to center the webcam's lens Adapters/Extensions: Right Angle Adapter: adapter which turns the webcam at a right angle for vertical photos/videos Lens Offset Adapter: adapter which shifts the webcam in order to center the lens (e.g. if you used the Latch Mount Centered & wanted to center the lens Distance Adapter 0.5inch: adapter which gives you ½" (12.7mm) of distance from the mount Cable Management Hooks (with mirrored versions for either side): Screwed Cord Hook Addon: Cord hook reuses one of the latch screws by fitting over that side of the latch Screwed Cord Hook: Cord hook which can be screwed onto your lack