Latrax Rally Drift Tire

Tire I designed to fit the following rims: -Latrax Rally Rim: https://www.thingiverse.com/thing:7325261 -These fit a little tighter than the low profile version when printed in TPU or PETG. Might need to go up on x&y 1-2% for PLA or PETG to slip on. They are a little challanging to print in TPU due to the overhang,printing slow helps the most with keeping the shape. These fit tight in TPU but still may need some glue. I will have to glue mine they slipped off once or twice testing. Milage may vary depending on what you have under the hood. I have a hobbywing QUICRUN WP 16BL30 G2 & QUICRUN 2435 4500kv motor in my latrax if that helps. LatraxRoundedDriftTire: These are really fun, The first layer has one wall, TPU - I did a skirt, TPU sticks a little better and doesnt warp as bad. Works well for me. Slow like 10-15mms (TPU all the way around fun inside and out, works well on tall carpet) 7 for the walls left a little air gap, 0% infill PETG - Brim. PETG warps and lifts, I started to but seems to work well and print was successful. Faster at like 30mms. (super slide outside, fun with TPU front and PETG rear for indoor) Walls to where it was 100% infill, Infill was set to 0%. Update - New version added "LatraxRallyDriftSlope" they are not as tall, the contact patch is moved further towards the center of the car. Still testing but first one fits snug. -- Disclaimer-- I was able to get PETG to fit without scaling it, it's a super tight. It probably wont come off unless you break or cut it. Might be able to use a little sandpaper or file to make it an easier fit instead of the next step. I set the rim down with the spoke side on the ground, started the wheel over the rim, I didn't press down until it was almost level (the larger the angle of offset the more difficult it will be to get over the rim). Used my body weight, it took almost all my weight to get it on there. I used a step and had a handrail. (not responsible for any injuries trying this, you can just scale it up and glue it, or sand/file it to and avoid any risk here) Other Tires: Tires: Latrax Rally Low Profile Tire: https://www.thingiverse.com/thing:7325272 Latrax Rally MediumTire: https://www.thingiverse.com/thing:7327173 Latrax Rally Normal Tire: https://www.thingiverse.com/thing:7325423