LED Grow Lamp Holders for Hydroponics Tower

I originally added the LED arms and lights to my 5 gallon bucket with lid from here but they were really floppy. So I mixed the LED holder with the half spacer with no turn that I remixed from here. To get the lights far enough away from the plants, I extended the arms 80mm. I also tweaked the end of the arm slightly to rest all the way down on the body of the half for a bit more structure. To assemble this, you need to print 1 half with light support 3 long arms 3 LED_Holder_Tip from here You'll need 9x #8-32 x 1-1/2 in. machine screws & nuts to attach the arms to the half and the tips to the arms. I used these LED lights as recommended from the original design on thingiverse. I used these settings: half - about 2 hours at regular speed on my Bambu Lab X1C critical supports only (so just the 6 little “legs” that stick out) 3 or more walls 30% infill 0.2mm no brim (although you may want a brim) long arms - about 4 hours each at regular speed on my Bambu Lab X1C no supports 3 walls 50% infill 0.2mm LED Holder Tip (don't remember print time) orient vertically (to preserve the cleanness/dimensions to fit the LED lights) supports are needed 30% infill 0.2mm I did this quickly in Tinkercad so it's not perfect, but function over form :)