Lenovo M73 Mini Home Lab

This is a first revision there are issues with the design * You'll have to cut or sand to get this to work. Wood veneer goes on top of the print, attach with contact cemet, holes in the veneer will have to be manually cut and sanded after gluing. If you see screw holes they're using M3 threaded inserts, and M3x8 flat heat screws. One exception - the SSD box uses M4 threaded inserts, but will become M3 in any future versions. Printed on a Bambu with AMS, this design needs a support with a different material e.g. PLA w/ PETG supports or you'll leave lots of markings on the fronts. Designs for my mini home lab build based around the Lenovo M73 The HDD Box is based around the Maiwo K35274A 4-Bay HDD Enclosure (Amazon) The SSD Box is based around the Maiwo K25272C 2-Bay SSD Enclosure (Amazon) My specific monitor used a 7-inch IPS LCD with the model number MCX070IPS1801, it was a scavenged part but links below for what seems to be compatible. The controller is the one I used. LCD controller (avoid the display from the same seller - it's terrible) - https://www.aliexpress.com/item/1005006927684395.html IPS displays but without controller (not tested) - https://www.aliexpress.com/item/1005008784643519.html The HDMI switch is EnjoyGadgets EGHS3S (in stock on Amazon Canada but not the US)