Libre Computer AML-S905X-CC-V2 aka Sweet Potato base case

This is a remix of a remix of Stamos' case for the Raspberry Pi 3. This case has been modified for the Libre Computer AML-S905X-CC-V2 aka, “Sweet Potato” SBC that has the (mostly) same layout as the Raspberry Pi 3+ and the Libre Le Potato. The base case has been modified to fit the new Type-C power connector, relocate the hole to line up with the IR sensor, and filled in that non-existent audio jack hole. Also moved the screw holes to fit the eMMC module screw inserts. However due to not having the module I could not fully test clearance. Still works with the original lid from Stamos' case, however also made a small modification to the original lid to hold the board down via the USB ports when used without screws due to weight of that side of the board. Differences in lids can be seen in Photo 4, with Photos 5 & 6 showing the difference when the case is flipped upside down with both original and modified lids Also made my own model to allow rack mounting in a 1U space. Rack standoffs fit the Le Potato case remix and should also fit the RPi 3+ case without issues. For my use I had to use the M2 nut rack mount with M2x10 screws with a washer due to not having any M2.5 screws or nuts so the M2.5 version is currently untested but should be sized appropriately to use M2.5x10 screws. (12mm length can work with washers, but might protrude) Rack mounting screws in last picture are from @SpartanAlpha_1506570 https://www.printables.com/model/726606-server-rack-1u-and-2u-mounts-screw-and-cage-nut-re