Lock Pick 9 in 1 Multitool

Choose 9 attachments to print and assemble this multitool. Print Lower, Upper, 2 Nuts, and 9 spacers. The nut is hard to screw on with hand, use a tool if possible. Print threaded parts in high-quality settings. (i used 0.16mm layer height) Print with part solid. About 5 walls or do 100% infill The spacer is small, ARACHNE wall generator worked for this part Use stiffer materials such as PLA, PLA-CF. ABS or PETG are more flexible, which is bad for printed lock picks. Assembly Instruction: Place a 1mm thick tool on one end of the first rod Place a spacer (1mm thick too) on the end of the second rod Repeat until 9 tools and 9 spacers are used up Place Upper part on and screw nut if needed (The lid can be press fitted without nut) Slim 6 in 1 lock pick: https://www.printables.com/model/1138102-lock-picks-slim-6-in-1 📷 Image redacted — claim this model to add your own media Check out OTF Pick, Lock Pick Tensioners, Rake, and Notch Decoder too: https://www.printables.com/model/1112320-otf-lock-pick https://www.printables.com/model/1103439-lock-pick-tensioner https://www.printables.com/model/1110171-rake-lock-pick https://www.printables.com/model/1105728-lock-notch-decoder