Logitech Z-5500 stand adapter

This is a 3D printable adapter that you can use to mount your Z-5500 on speaker stands. These were deseigned for the Sanus HTBS speaker stands but might work with others if there's a way to screw them at the top. This was designed using Fustion 360 and contains the stl and f3d files. You will need to open the satellite speakers and remove the original feet. The speakers can be opened easilly as there are only 4 normal screws which are located under rubber grommets that hold the speaker grills.which can be a pain since Logitech decided to pour resin in the screw that old the feet to prevent you from removing them. Once you managed to remove the resin glue, you can unscrew the feet and replace it with this printed part using the same screw and nut (you don't need the washers) To secure the assembly to the stand you can use the M5 screw that Sanus provides to screw it down.