Low Poly Car Wheels - Remaster

Alternative wheels for Turtleman's Low poly car models. To maintain reasonable quality, I had to split the wheels to multiple parts. I suggest printing with maximum layer height of 0,16 mm, but for more detail and less potential issues, print with 0,15 mm or less. Keep the given orientation in all stl files and add brim to small parts ( middle hole insert and stem ). The middle hole insert is optional, but I like to add the main colour of the car model to the wheels and make them stand out. Also, scaling down the model will not work well, it is pretty tiny as is. At this point, I have made 4 versions. V1.0 - has to be glued, but should work on any printer as tolerances aren't an issue 📷 Image redacted — claim this model to add your own media 📷 Image redacted — claim this model to add your own media Glue with CA for example 📷 Image redacted — claim this model to add your own media V1.1 - same as V1.0, but has removable rim that can be printed in different colour to add more spice V2.0 - this version can be glue-free, as the stem that is inserted into the car model has a thread that screws into the wheel - I have made the thread tolerance quite loose, so there shouldn't be any issue with clearance. Print the stem and middle insert with brim to be safe. 📷 Image redacted — claim this model to add your own media 📷 Image redacted — claim this model to add your own media 📷 Image redacted — claim this model to add your own media V2.1 - same as version 2.0 with removable rim. 📷 Image redacted — claim this model to add your own media 📷 Image redacted — claim this model to add your own media (Rim is from PETG, so the quality is not ideal, sorry) 📷 Image redacted — claim this model to add your own media I hope you like the model, and if you have any problems or suggestions, let me know.