Low-profile DIN rail clip

This DIN rail clip has a pull tab to release it from the rail. A flathead screwdriver or Allen wrench can be used to pry/hook and pull the tab. 📷 Image redacted — claim this model to add your own media 📷 Image redacted — claim this model to add your own media 📷 Image redacted — claim this model to add your own media Spacing between holes is 31mm. Triangle symbol on the clip shows correct orientation with the mount. Required parts: 2x M3x5x4 brass insert (Voron BOM standard insert) (example: Cnckitchen store ) DISCLAIMER: This model has very tight tolerances around the release tab, make sure your printer is well-calibrated to have a fully functional print. Compatible Only with standard 35 × 7.5 DIN rail (IEC/EN 60715) Print settings: 0.2mm layer height 4 wall perimeters 4 top/bottom layers 40% infill Currently only tested with ABS/ASA and PETG