Low Profile Solar Mesh Vehicle Node

Print in PETG or ASA. For PETG we highly recommend treating the part in Dichtol AM Hydro for guaranteed water proofing. Thick walls(4-5 lines) and standard infill. Slightly over extruding can help fill the voids in the layers. Bill of Materials: Rak19007 or 19003 with 4631 module Rak12500 GNSS module 3.7v 3300mah 105060(this is the height, width and length in millimeters) lipo battery (7) M3x6 self tapping screws (Bottom Cover) (4) M2x8 self tapping screws (battery strap) (3) M2x5 self tapping screw(hold down board) ufl to sma cable that matches your antenna 2mm diameter gasket https://www.amazon.com/dp/B0DM5YPCKR?ref=fed_asin_title&th=1 Same as original: Solar Panel Magnets