Lucky 13 skin: Orc Warrior

This started out as just a set of armor but when I realized it looked a lot like gear from WoW, I decided to lean into it and made the axe based on Gorehowl. LUCKY 13 PIECES NEEDED On top of downloading my files, you will need to download most of the armature and some of the skin from the original Lucky 13 model. All of the following pieces should be printed in green. If there is a [2X] , [6x] or [12x] in the title, that means you need two, six or twelve of that piece. Those amounts are what you will need to make a full set of armor. That goes for both the files that I've uploaded as well as the Lucky 13 pieces I'm linking to below. 00A01 armature head.stl 00A02 armature neck.stl 00A03 armature chest.stl 00A04 armature abdomen.stl 00A05 armature waist.stl 00A06 armature hips.stl 00A08 [2X] armature shoulder.stl 00A09L armature upper arm left.stl 00A09R armature upper arm right.stl 00A10L [2X] armature forearm left.stl 00A10R [2X] armature forearm right.stl 00A11 [2X] armature glute.stl 00A12 [2X] armature thigh.stl 00A14 [2X] armature shin.stl 00A15L armature foot left.stl 00A15R armature foot right.stl 00B01 skin head.stl 00B02 skin neck.stl 00B03 skin chest 1.stl 00B04 skin chest 2.stl 00B05 skin abdomen.stl 00B11 [2X] skin glute.stl 00B12 [2X] skin thigh 1.stl 00B13 [2X] skin thigh 2.stl HANDS It doesn't matter what style of hands you use but they should be printed in green. The following list are the basic hands originally released with the Lucky 13 model however there are lots of different hands out there, you just have to search for them. 00A17L armature hand flat left.stl 00A17R armature hand flat right.stl 00A19R armature hand dynamic right.stl 00A19L armature hand dynamic left.stl 00A21R armature hand grip right.stl 00A21L armature hand grip left.stl 00A18L armature hand neutral left.stl 00A18R armature hand neutral right.stl 00A20L armature hand fist left.stl 00A20R armature hand fist right.stl If you want to use the axe, you will need the Detailed Simple Grip hands made by Printables user Cromulent . ASSEMBLY Assembly shouldn't be too difficult. First, assemble the L13 parts listed above the same way you would normally using my remixed clavicle and knee parts. If you're not familiar with Lucky 13 assembly, check out the Lucky 13 manual . WRIST Pieces you will need: Wrist 1 - Grey.stl Wrist 2 - Grey.stl Wrist 1 Plate - Red.stl Wrist 2 Plate - Red.stl Large Spike - White.stl Medium Spike - White.stl Fit the red wrist plates into the grey wrist pieces and then fit the spikes into Wrist 1 - Grey.stl as seen in the photo below. The completed Wrist 1 - Grey.stl and Wrist 2 - Grey.stl then snap together over the forearm armature. 📷 Image redacted — claim this model to add your own media UPPER ARM Pieces you will need: Left Upper Arm - Grey.stl Right Upper Arm - Grey.stl Right Upper Plate - Red.stl Left Upper Plate - Red.stl Small Spike - White.stl Super easy to assemble just like the wrist. The red plate and the spike fit into the grey piece. The completed upper arm skin then slides onto the upper arm armature as seen in the following picture. 📷 Image redacted — claim this model to add your own media SHOULDER Pieces you will need: Shoulder - Grey.stl Shoulder Plate 1 - Red.stl Shoulder Plate 2 - Red.stl Large Spike - White.stl Medium Spike - White.stl X2 Again, straightforward assembly. The red plates fit into the grey shoulder and then the spikes fit into the shoulder as seen in the following picture. The completed shoulder then slides onto the remixed clavicle armature. 📷 Image redacted — claim this model to add your own media SHIN Pieces you will need: Shin 1 - Grey.stl Shin 2 - Grey.stl Shin Plate 1 - Red.stl Shin Plate 2 - Red.stl Large Spike - White.stl Medium Spike - White.stl X3 Just like the rest of the armor so far, the red plates fit into the grey. In this case, both red plates fit into Shin 1 - Grey.stl and then the spikes fit in as seen in the picture below. Shin 1 - Grey.stl and Shin 2 - Grey.stl connect to the shin armature the same way a regular shin skin would. 📷 Image redacted — claim this model to add your own media AXE I'm actually including three axes although only one is pictured. The first version is what you see in the pictures, eight pieces and four colors. The other two versions are a solid, one piece axe ( Axe - 1 Piece.stl ) and a two piece ( Axe 1 of 2.stl and Axe 2 of 2.stl ) for those users who want the axe but aren't necessarily up for putting together a complicated piece. This assembly is for the first version. Pieces you will need: Axe Handle Knob - Grey.stl Axe Inscription - Grey.stl Axe Spikes - Grey.stl Axe Head - Grey.stl Axe Handle 1 - Dark Brown.stl Axe Handle 2 - Light Brown.stl Axe Inscription Plates - Red.stl First thing you need to do is to fit the Axe Inscription Plates - Red.stl into Axe Inscription - Grey.stl as seen in the following photo. 📷 Image redacted — claim this model to add your own media Next, take that inscription piece and fit Axe Head - Grey.stl into the middle and put that to the side for a moment. 📷 Image redacted — claim this model to add your own media Take Axe Spikes - Grey.stl and fit it into Axe Handle 2 - Light Brown.stl as seen below. 📷 Image redacted — claim this model to add your own media Now take the completed axe head and fit it into the axe handle assembly. Start by putting the bottom of the axe head into the axe handle and then swinging the top of the axe head in. See the below photo for reference. 📷 Image redacted — claim this model to add your own media Last thing to do is connect the handle and knob the the finished axe head and you're good to go. 📷 Image redacted — claim this model to add your own media NOTES: This skin is still a work in progress. there is a good chance that I end up adding a helmet, shield or something else. Wrist 1 [2X] - Grey.stl , Shin 1 [2X] - Grey.stl , Shin 2 [2X] - Grey.stl , Waist - Light Brown.stl , Axe Inscription - Grey.stl , Axe Head - Grey.stl , Axe 1 of 2.stl (optional) and Axe - 1 Piece.stl (optional) will require supports.