Lucky Stormtrooper

Come to the dark side! Minimal Stormtrooper skin for Soozafone's fantastic Lucky 13 armature. Lucky Vader needs his troopers. Get the Vader model here: https://www.printables.com/model/172706-lucky-vader UPDATE: Get C-3PO here: https://www.printables.com/model/217939-lucky-c-3po The Stormtrooper is remixed from the original Lucky 13 skin files. The helmet is based on and remodeled from a model by HarisonHag1 on Sketchfab. No supports needed, but the head is a two-part print. Use CA glue to join the two parts. There are holes for alignment. Insert a short piece of 1.75mm filament to help aligning the parts correctly. Print the head at 0.1mm for best details, the rest of the parts should be printed at 0.15mm. There is also a (probably wildly inaccurate) E-11 blaster included. I also include a shorter neck armature piece that looks better with the helmets. If you're brave you can paint the helmet and post a make. The rest of the parts are found in Soozafone's Lucky 13 Model , so you will need to print the armature and skin pieces (except head, shoulders, chest1 and waist) from that: https://www.printables.com/model/148367-lucky-13-printable-jointed-figure Gcode for the Mini included for timing and so on, but slice your own for best results. Credit: This work is based on "PC Computer - Fortnite - Stormtrooper" (https://sketchfab.com/3d-models/pc-computer-fortnite-stormtrooper-6681f4496b074eabadebea0b4cbf7abf) by HarrisonHag1 (https://sketchfab.com/HarrisonHag1) licensed under CC-BY-4.0 (http://creativecommons.org/licenses/by/4.0/)