mardave meteor rear arms
by dirtyharry · via Thingiverse
| Format | STL |
| Category | Other |
| License | CC BY-NC |
| Uploaded | Mar 29, 2026 |
👁 5 views
Description
Work well in pla+ petg or easynylon . Designed to be easy to print and slightly chunky so pretty much any PLA + , PETG , Nylon is up to the job . I normally go 100% infill. Pin holes need to be drilled out with 3.2mm (1/8") drill bit to get a good fit
Originally published on Thingiverse
