Micro Dice Tower (Blank, DnD, CoC)

📷 Image redacted — claim this model to add your own media A small (about UNO cards stack sized) dice tower with dice tray included. Both parts print without supports and use about 70 grams of filament. HIGH ROLLS GUARANTEED* 📷 Image redacted — claim this model to add your own media The tower can fit a whole set of standard dice for storage. Put on the tray to keep them inside 📷 Image redacted — claim this model to add your own media The bumps on the tray and indents on the tower allow you to lock the tray to the tower in two positions. To close it after use and to lock it in place when using so the tower doesn't slide on the tray. 📷 Image redacted — claim this model to add your own media Ribs on the steps of the tower to make sure that your rolls will be thorough and random For printers without multicolor printing, you can apply color change for a few layers to make the logo and bottom of the tray a different color (at 0.2 layer height It's for layers 3-7). 📷 Image redacted — claim this model to add your own media 📷 Image redacted — claim this model to add your own media You can choose between a blank, Call of Cthulhu or Dungeons and Dragons versions. 📷 Image redacted — claim this model to add your own media Make your own version by cutting any logo or text on the blank tower and tray Recommended depth: Tower: 0.25mm Tray: 0.4mm *not really, but my friends and I had some good luck while using those during our last Call of Cthulhu session :)