Micro SD holder for CMF Phone 2 Pro

Description: So this model is made after the Official Universal Cover models for use with CMF Phone 2 Pro. “The part is attached to the rear of CMF Phone 2 Pro with 4 M2 screws and our Accessory Point Cover (M2.5). Find device dimensions, screw sizes and more uploaded to support your creativity!” Its main feature is the micro SD card holder on its back made after the original assembly design for easy printing with no supports and easy assembly after printing. 📷 Image redacted — claim this model to add your own media The card can hold up to 10 x 📷 Image redacted — claim this model to add your own media Micro SD Cards in a compact way and easy to remove mechanism inspired by @scross01. The Micro SD Card Holder comes with text or not if you do not like it. * For now you can only store 10x Micro SD cards but i work on making other models for bigger SD cards or other cards, even debit and credit cards Updates: V1.2: added a card holder with less material modified slicer settings for modified universal cover: Enable supports: False → True Type: null → normal(auto) modified slicer settings for card holder insert: Elephant foot compression: 0.15 mm → 0.25 mm also added a little bevel to the card holder and made the walls 1.5 mm Recommended Print Settings: 📷 Image redacted — claim this model to add your own media Modified Universal Cover 10.59 g / 30 min 34 sec Quality: Layer line: 0.16 mm Elephant foot compression: 0.15 mm Strength: Sparse infill density: 15% Sparse infill pattern: Gyroid Wall Loops: 2 or 3 for more strength Supports: Needs supports Enable supports: True Type: normal(auto) 📷 Image redacted — claim this model to add your own media Lens Insert 0.62 g / 4 min 48 sec Quality: Layer line: 0.16 mm Elephant foot compression: 0.15 mm Strength: Sparse infill density: 15% Sparse infill pattern: Gyroid Wall Loops: 2 or 3 for more strength 📷 Image redacted — claim this model to add your own media Micro SD Cards Holder 6.92 g / 25 min 21 sec with text 7.00 g / 22 min 16 sec no text Quality: Layer line: 0.16 mm Elephant foot compression: 0.15 mm Ironing Type: Top Surfaces Strength: Sparse infill density: 15% Sparse infill pattern: Rectilinear Wall Loops: 2 or 3 for more strength 📷 Image redacted — claim this model to add your own media Card Holder Insert 17.97 g / 1 h 25 min normal 12.03 g / 1 h 26 min light Quality: Layer line: 0.16 mm Elephant foot compression: 0.25 mm Strength: Sparse infill density: 15% Sparse infill pattern: Gyroid Wall Loops: 2 or 3 for more strength Assembly: 📷 Image redacted — claim this model to add your own media The assembly is very easy and practical, you just need to put the micro SD card holder in the Card holder insert then insert it and the Lens insert into the Modified Universal cover. If the assembly is not very sturdy its no problem because the model is made after the original lens insert