Mini 13 Stormtrooper

Come to the slightly smaller dark side! Stormtrooper skin for Soozafone's fantastic Mini 13 armature. Remix of my Lucky 13 version, with additional parts, and detailed legs. The Mini 13 version of is Vader also available. Get it here: https://www.printables.com/model/445847-mini-13-vader The Stormtrooper was initially remixed from the original Lucky 13 skin files. The helmet is based on and remodeled from a model by HarisonHag1 on Sketchfab. Additional modeling has been done to adapt it to the Mini 13 armature. Main parts: Head/Helmet Shoulder (print two of these) Chest Waist Thighs/Upper legs (left and right, they have different details) Shins/Lower legs (left and right, they are also different) Accessories/Optional: E-11 blaster for Mini 13 (a shorter version of the Lucky 13 blaster) Shoulder pauldron to indicate rank or specialization. Pauldron shoulder piece with positioning notch for gluing. No supports needed. The head is a single part print this time, so no glue needed for the head like in the Lucky 13 version. Parts should be printed at 0.15mm. Optionally print the head at 0.1mm for best details. The rest of the parts are found in Soozafone's Mini 13 Model here: https://www.printables.com/model/422353-mini-13-printable-jointed-figure You will need to print the following pieces from this: All the frame pieces in mini13-all-frame.stl 2 × mini13-armor-foot-2x.stl 2 × mini13-armor-arm-2x.stl Pauldron Give your trooper a promotion and make them a commander or special role with the optional pauldron version of the shoulder. Use CA glue to join the two parts. There is a notch to help with aligning the parts correctly. Print in the color of your choice. About colors, from Wookiepedia: “They could indicate the wearer's rank, position or specialization. A black colored pauldron indicated enlisted troopers, white was for sergeants, and orange for unit leaders or captains. Snipers wore blue pauldrons, Grenadiers and Incinerator troopers wore red, and Artillery stormtroopers wore yellow.” Gcode for the Mini+ included for timing and so on, but slice your own for best results. Credit: This work is based on "PC Computer - Fortnite - Stormtrooper" (https://sketchfab.com/3d-models/pc-computer-fortnite-stormtrooper-6681f4496b074eabadebea0b4cbf7abf) by HarrisonHag1 (https://sketchfab.com/HarrisonHag1) licensed under CC-BY-4.0 (http://creativecommons.org/licenses/by/4.0/)