Mini Pinecil Case

A small and extremely portable Pinecil case that suits my needs. Has space for: 1 Pinecil soldering iron 7 Soldering iron tips 1 Solder spool 1 608 bearing hot iron stand Most heat set insert tips. Iron stand assembly: insert a 608 bearing into the open space and tighten it in using an M3 screw and a nut or heat set insert. Next lay it flat in the large compartment next to the solder spool peg and push it towards the smaller part of the case until it pops in to place. The hinge on the bottom shell has been made slightly larger to accommodate heat set inserts. Use M3 screws and M3 nuts to assemble the hinge and the latching mechanism. I used heat set inserts without melting them in because I a. have way too many and b. like how they look. Use a cotton ball or piece of paper towel to hold the heat set insert tips in place and keep them from rattling. The solder reel is from the original design and can be super glued together once printed. Latches also from original design and are used the same way.