Mini Snowman Mold (Print-in-Place Version)

This is a working print-in-place version of Filip Zitkos super cute snowman mold. The tolerances for the hinge are 0.2mm. I recommend printing the mold at 0.1mm layer height with default settings. That way the hinge comes out perfect and the tiny mold looks fancy, especially when using silk PLA. The model prints fine without supports with some minor artefacts around the middle on the inside. You may use supports, but make sure to reduce the overhang angle to prevent huge amounts of support and lengthy print times. On the MK4 with input shaping the print takes roughly about 1h 30min.