MINI - US$ Coin Sorting Vault

This is the smaller version. If you want to print the US$ Coin Sorting Vault on the Prusa MK4 , you can find it here . Rocco's Coin Sorting Vault is an absolute eye-catcher! Great design and perfect execution. Until a few weeks ago, I printed everything on the Prusa Mini. Now, I also have a Prusa MK4. Back then, I couldn't print some models due to their size and was often very disappointed. Therefore, I've created a printable version of the US$ Coin Sorting Vault specifically for Prusa Mini owners here. The MINI version looks almost identical. The sorting functionality is exactly the same. What parts do you need for that? I didn't have to modify some parts of the original versions (Rocco's bigger US$ original and my EURO MINI original). Therefore, you won't find them here, but rather with the originals. Therefore, in addition to the parts listed here for the US$ MINI version , you still need the following to download and print: [ A ] Parts from my EURO MINI original: see: https://www.printables.com/de/model/686197-mini-euro-coin-sorting-vault/files Jamb MINI.stl Door Frame Cap MINI.stl Door Frame MINI.stl Top Bolt MINI x 2.stl Site Bolt MINI x 2.stl Hinge Strap MINI x 2.stl [ B ] Parts from Rocco's bigger US$ original: see: https://www.printables.com/de/model/655452-coin-sorting-vault/files Sorter Frame.stl Coin Slot Taller Test.stl Coin Sled.stl Gear Core x 4.stl Gear Teeth x 4.stl [ C ] One of the two handle alternatives (whichever you prefer): see: https://www.printables.com/de/model/676720-alternative-handle-for-coin-sorting-vault OR https://www.printables.com/de/model/655452-coin-sorting-vault/files [ D ] Two dowles for the vault door: see: https://www.printables.com/de/model/673752-dowels-for-coin-sorting-vault/files [ E ] Five bearings: 22mm outer diameter, 8mm inner diameter, 7mm high You can buy them for little money (Example: amazon ) or you can print them. Here at printables.com, some well-rated bearings are listed. I haven't tried them myself; I bought them. [ Optional ] Extensions If you like, you can later expand the model. The following extensions fit 1:1 on the MINI version as well: Padlock frame Coin Lift Printing information Read the following information carefully. You use quite a lot of filament for this model. It would be a shame if you produce waste because you haven't read important information. Generaly For all parts, I use 10% Gyroid infill . I use a 0.2mm layer height for all parts. All stl files are correctly aligned on the print bed. Additional settings for the individual parts - USD Box MINI Frame … Corner / Long / Short Infill: 100% - Side Bolt MINI Support: see the following pictures 📷 Image redacted — claim this model to add your own media 📷 Image redacted — claim this model to add your own media Assembly instructions Rocco has explained the assembly of the vault door perfectly. Please watch his video tutorial . For the assembly of the USD Box MINI , please read the attached PDF document. I am looking forward to your Makes! :-) If you like this design, feel free to check out my others here .