Mini Vault

Designed to be printed on the Prusa Mini! (and bigger printers). The box is 6.25" x 6.25" x 4.25". This design is fully 3D printed with the exception of a single skateboard bearing. No support material is required. Watch the video for full assembly instructions. There are 2 version of the “Gear8Teeth” with varying levels of tolerance. I recommend printing the ‘NORMAL’ version and test it. If it is too tight, print the ‘LOOSE’ version. It is only a few grams of filament and it should print quickly. Below is a link for the bearings I used. Note: This link is active as of June 2024, but be sure to verify the bearings you purchase are 608-2RS Skateboard Bearings (8mm x 22mm x 7mm) https://www.amazon.com/Pack-608-2RS-Ball-Bearing-Skateboards/dp/B07C6FL8TW?pd_rd_w=4oxud&content-id=amzn1.sym.d5ef238f-cc6b-4540-aa3d-ad191f99daba&pf_rd_p=d5ef238f-cc6b-4540-aa3d-ad191f99daba&pf_rd_r=CS36K9PRCXKE41X0Z37N&pd_rd_wg=JDchI&pd_rd_r=f17d2300-3fa0-4cce-a5ef-1821a66f893f&pd_rd_i=B07C6FL8TW&psc=1&ref_=pd_bap_d_grid_rp_0_1_ec_pd_hp_d_atf_rp_2_t