Minolta 9000 grip replacement - TPU optimized

Constructed completly on my own. I recommend TPU as material for the parts, this provides a much better feel. Furthermore I recommend CURA's fuzzy print to add texture. Fit is as good as it gets, tried out on multiple 9000 already by my own but you have to remove all the old rubber on the filmdoor and unscrew the olf rubberpart of the body grip. Disassembly of the outer shell of the 9000 is therefore required for this step. There are 9000 versions where ,y grip can't be installed! Look inside of the Battery chamber of your 9000 - If you can see four screws holding the rubberpart of the body grip, you can use my model. If the grip is glued on - no screws visable - unfortunately no way to replace the old rubber (Only if you have a whole new grip assembly). If you have questions regarding the neccessary disassembly, just ask me. PS: The Batterybox is not an TPU item, maybe PLA or PETG, just some box to store spare batterypacks is you have some.