Modular 10 Inch Server Rack - Reworked - 220 x 200 Bed Remixes

Cross Brace: There are three STLs for your use: cross brace with cut area; cross brace pre-cut right side; cross brace pre-cut left side. I moved the fan mount location to the corner, rather than the middle. This allowed for the addition of a cut area. The resulting pieces can either be cut in your slicers with connectors added, and then glued. Alternatively, on the pre-cut pieces four holes that can be used for bolting. Holes are sized for M4 or #8 screws. I've also added a “pin” that can be used to align the pieces of you don't want to bolt it.