Mount for the Prusa Buddy3D Camera

This is a simple camera mount for the Prusa Buddy3D camera. It does fit inside the enXLosure enclosure (I highly recommend it if you're thinking of adding an enclosure). I don't know if it will fit inside the Original Prusa XL Enclosure. It will work with one-head and dual-head XLs but I don't think it will work with the five-head version. In the back right corner of the frame there's a 6mm torx bolt, replace that with a 3mm x 16mm hex bolt to attach the mount. The camera is held at the just the right angle to view the entire printbed. There's a support built into the model so you don't need add supports, it just breaks off. Fortunately, there's a small space in the enXLosure frame, just big enough to pass a USB cable to power your camera. I've also uploaded a replacement PSU cover with USB port so you can power your camera directly from the printer.