NA Miata tail light covers

I wanted the retro look lights but was too cheap to spend the hundreds to get the rear panel. I bought a set of black altezza lights. These go over them for the look I wanted. I used Infinity SuperTAC 500 hot melt glue to attach the covers. Printed on ABS then coated with 3 coats of Z-Poxy. Finished them with sanding in steps up to 5000 grit. Then polished with compound. I used a trailer light converter to combine the brake/turn signal. I will be posting my dual purpose 3rd brake light. Clear lens with space for four leds. 2 red and 2 white. It handles 3rd brake and reverse light. I built the supports into them. I tried a bunch of different ways and this is the only way to get a good print. Without the tall supports they WILL warp. You will need to Dremel the supports off. I do not have any other file formats. What you see is what you get.