NC Miata Dynotronics STEALTH rear turbo Air filter box

Air box prototype for Dynotronics Stealth rear mount turbo for NC Miata. Uses AFE Flow Pro DRY s Air Filter 21-30001 (3" Flange (1.38" Flange Length) x 5" Base x 3-1/2" Top Cone x 5" Height (6.38" Total height). I am running/will run a VTA BOV so there is no tube for a recirc valve. Attach both cap ends with self tapper screws. Print in ASA or ABS. The "barrel" layer height can be .2 to .32 with a .4 nozzle. I printed the caps at a 45 degree angle at .1 and .12 layer height. This reduces supports needed. Print 100% infill. Current prototype uses 4mm walls. Will update results after heat testing. I need to drive in rain to see if any drain holes are needed for water egress. TinkerCAD link: https://www.tinkercad.com/things/56IBNToeVpG-nc-miata-dynotronics-stealth-rear-turbo-air-filter-box?sharecode=IGvPR5ZuJF5ZQRY-F4REw09OaU8aXKt_HDG4WEO0FrE